Pallet Curtain Rods – My 30-Minute Solution

Y’all, I love my bay window. I mentioned my smit-ness for its stunning view in my budget friendly dining room makeover. After all, it was that view which finally sold me on buying this fixer-upper!

To this day, I have never covered it up with curtains, shades, or furniture because being able to look out across a huge grassy field and watch deer and other wildlife pass unobstructed is a daily joy. But the space was screaming for some love and attention. I knew I just had to do something that keeps the view wide open but makes my bare bay window pretty to look at, not just through.

The problem was, with the smaller size of the side windows, there was no way to hang standard curtain rods and my life’s mission with this window is not to have curtains covering that view! That’s when I had a light-bulb moment!

As you all know, I especially love pallet wood and let me tell you, I came up with a genius plan — Yep! That happens sometimes! — to incorporate some scrap wood into the design. And y’all, it solved all my problems.

Here’s how I did it in less than a 1/2 hour with pallet wood. Affiliates links are provided for your convenience at no cost to you. You can read my disclosure statement here.

Pallet Curtain Rods
Supply List

• Pallet wood – I used craft pallet wood from Hobby Lobby
  • you can buy similar craft wood here.
• Curtain hooks – ones I had on hand
  • here are similar hooks
• Screws
• Drill
• Curtain sheers

While on a recent jaunt to Hobby Lobby, I found a bundle of weathered craft wood. These were skinnier pieces that would be perfect for the small space above my bay window, but I wasn’t sure how I was going to hang the sheers. Then it came to me: I had some old wooden curtain rings that had screw-in eyelets with hanging hooks.

First, I disassembled the hooks from the rings leaving the screw-in eyelets in place like the picture below.

I marked each craft wood piece, spaced about 4 inches apart for the eyelet screws.

Then I predrilled pilot holes and screwed in the eyelet hooks.  For each side, I used two pieces of craft wood with seven of the eyelet hooks.

Next, I screwed the two pieces into each corner of the bay window and clipped the sheers.

That’s it! Isn’t that so easy?

I didn’t make miter cuts to the wood. In fact, I didn’t make any cuts at all. I butted the two wood pieces beside each other and it was a perfect fit. Done!

The result is light and bright without too much obstruction of my beautiful view.

Since I added blue tones to my dining room makeover, I wanted to tie in the same color for my curtains. I found this blue and white striped trim in the upholstery department and used them as tie backs for the window.

I love these pallet curtain rods so much, but I love even more how quick and easy the whole project was.

Surprisingly, a simple stack of craft pallet wood and old hooks transformed my plain bay window into a soft and cozy feature! There’s still plenty of room to see outside, but now, it’s pretty to look at.

Do you have a window you’ve been trying to figure out a solution for? Let me know if this inspires you to make some pallet curtain rods of your own!

If you like this project, then you’ll love some of my other Pallet Projects.

PIN THIS FOR LATER

I share with these friends.